Silvercrest SSMS 600 C3 - Manual (Page 13)

10 SSMS 600 C3
GB
Operation
WARNING! RISK OF INJURY!
► Foodstuffs should not be too hot. Squirting contents may cause scalding.
NOTICE
► When you beat cream with the whisk  hold the container at a slant
during the beating. In this way the cream will be thicker quicker. Ensure
that cream cannot be sprayed out of the container while it is being beaten.
When whipping cream, slide the speed regulator  to position "5".
When you have assembled the blender set as you wish to use it:
1) Insert the plug into a mains power socket.
2) Press and hold the switch  to process foodstuffs at the standard speed.
Slide the speed regulator  in the direction of “5” to increase the speed.
Slide the speed regulator  in the direction of “1” to reduce the speed.
3) Press and hold the turbo-switch  to process foodstuffs at a higher speed.
By pressing the turbo-switch  the maximum processing speed is available
immediately.
4) When you have completed the processing of the foodstuffs, simply release
the switch.
NOTICE
► Should unusual noises be heard during operation, such as squeaks or
similar, lubricate the drive shaft of the blender with a few drops of neutral
cooking oil: