Silvercrest WIRELESS SOCKET SET - Manual (Page 6)

6 GB/IE
Introduction
Wireless Socket Set
Introduction
Intended use
The remote controlled socket set is suita-
ble for the remote switching on and off
of electrical appliances and lamps. This
device may only be used individually.
Do not have one remote controlled
socket inserted behind another. Any
modification to the appliance shall be
considered as improper use and could
lead to considerable risk of accident.
The manufacturer will not accept liabil-
ity for loss or damage arising from im-
proper use. This device is not intended
for commercial use.
Scope of delivery
Please check after unpacking that this
set is complete.
2 Remote controlled sockets
1 4-channel remote control
2 AAA batteries 1.5 V
1 Set of operating instructions
Control elements
Remote Control (fig. A/B):
1 Remote control unit
2 Power indicator light
3 Channel OFF button
Channel A, B, C, D, E
4 Channel ON button
Channel A, B, C, D, E
5 Battery compartment cover
6 DIP switch
Remote controlled socket
(fig. C/D):
7 Remote controlled socket
8 Earthed wall socket with flap lid
and child protection
9 Safety plug
10 DIP switch
11 Cover (DIP switch compartment)
12 Screws
Technical Data
Remote control
Classification:
RCS AAA1000-A
Battery: 2 x AAA, 1.5 V
Transmission
frequency:
433.92 MHz
Certification: The system has a
general certifica-
tion (BZT) and is
subscription free
and non-billable.
Range: depends on the
environmental
conditions, ap-
prox. 25 m in
optimal conditions
91089_silv_Funksteckdosen-Set_Aussen_Content_GB.indd 6 02.08.13 14:20