Silvercrest SDRB 1000 A1 - Manual (Page 45)

- 42 -
Attention!
• Should the care instructions in the clothing item
forbid ironing (Symbol ), you may not use the
steam brush on it. Should you do so, the clothing
item could be permanently damaged.
• The watertank 1 is to be filled exclusively with
mains water (or a mix of distilled and mains wa-
ter). You will otherwise damage the appliance.
• You may not clean the appliance with solvents,
alcohol or abrasive cleaning agents. These could
cause damage to it.
Before the First Usage
• Remove the steam brush from the packaging.
• Remove all possible adhesive tags and protective
foils from the steam iron.
• Remove the protective cap from the brush attach-
ment w.
Attention!
Plastic bags can be dangerous. To avoid fatalities
through suffocation, keep plastic bags out of the
reach of children.
Note:
As every steam brush is tested for functionality after
manufacture, it is possible that there may be droplets
of water in the watertank 1.
• Fill the watertank 1 with water (see chapter
"Filling with water").
• Insert the power plug 7 into a correctly instal-
led and earthed mains power socket.
• Hold the steam brush horizontally.
• Place the temperature regulator 3 at the posi-
tion "MAX".+
• Heat the steam brush up at the highest setting
for a few minutes. By doing this you will clear
production residues from the sole of the iron 0.
• Activate the steam shot button 8 a few times, so
that steam exits from the sole of the iron 0 .
• Then iron a redundant piece of material, this will
remove any impurites that may possibly be on
the sole of the iron 0.
Note:
On the first heating up of the appliance a small volume
of smoke and smell may be generated, caused by
production residues. This is completely normal and
is not dangerous. Provide for sufficient ventilation,
for example, open a window.
Operation
Notes
• Should the care instructions in the clothing item
forbid ironing (Symbol ), you may not use
the steam brush on it. If you do so, the clothing
item could be permanently damaged.
• Do NOT use the appliance on leather, velvet, im-
pregnated furniture or steam sensitive materials.
If you do, the material/furniture could become
damaged.
Filling with water
Attention!
Fill the watertank 1 exclusively with tap water or distil-
led water mixed with tap water. Never fill watertank 1
with chemical substances, cleaning agents (with the ex-
ception of decalcification agents) or other liquids.
Do not use chemically distilled water. This would
irreparably damage the appliance.
IB_93147_SDRB1000A1_CH.qxd 07.08.2013 11:15 Uhr Seite 42