Silvercrest SSOT 6 B2 - Manual (Page 22)

22 GB
Operation

Do not use the appliance immediately after cleaning
the measuring head
1 . The evaporative cooling eff ect
of the detergent may falsify the measuring result.
Sample applications:
-
The temperature of milk in baby bottles
- The temperature of bathwater
1. If the sleep mode has been activated, activate the
thermometer again by pressing any button before
taking a measurement.
2. Carefully press on the protective cap 8 and remove
it with a gentle rotary motion and without using any
force.
3. Make sure that the measuring head 1 and the
measuring sensor are clean.
4. Press the “FOREHEAD” button 3 and the “EAR”
button 2 repeatedly at the same time until “Food”
is shown in the LC display 4 (Illustration E).
5. Hold the measuring head at a distance of 1 cm from
the liquid and / or surface whose temperature you
want to measure.
6. Press the “EAR” button 2 to start the measurement.
7. Now you can read off the measurement result on the
LC display 4 (Illustration E).
8. Values can be displayed in °C as well as in °F
(see “Functions / error analysis - selecting the
temperature unit”).
IB_96247_SSOT6B2_GB_CZ_SK_DE_LB4.indd 22 IB_96247_SSOT6B2_GB_CZ_SK_DE_LB4.indd 22 20.11.13 15:43 20.11.13 15:43