Silvercrest SSOT 6 B2 - Manual (Page 23)

23 GB
Operation / Functions / error analysis
9. Press the “EAR” button 2 again to carry out further
measurements.
10. The appliance automatically switches off if it is not
operated for longer than 1 minute. This application is
not stored in the device.
In order to return to standard mode, proceed as follows:
1. Press the “FOREHEAD” button
3 and the “EAR”
button 2 repeatedly at the same time until the LC
display 4 again shows the room temperature, date
and time, as well as the symbol (Illustration D).
2. You are now back in standard mode.
 Functions / error analysis
 Selecting the temperature unit

Press and hold down the “EAR” button 2 and the
“FOREHEAD” button 3 at the same time until “°F”
appears behind the temperature display. Switching
from “°F” to “°C” is possible with the same procedure.
 The memory function (memory mode)
 IMPORTANT!
The current measurement is always stored in the last storage
space. When all storage spaces have been occupied, the
oldest measurement is always deleted from the memory.
IB_96247_SSOT6B2_GB_CZ_SK_DE_LB4.indd 23 IB_96247_SSOT6B2_GB_CZ_SK_DE_LB4.indd 23 20.11.13 15:43 20.11.13 15:43