Storage, Replacing shaving foils/cutter blocks – Silvercrest SFR 36 A1 User Manual

Page 54

Advertising
background image

52 GB

NOTE: to ensure a consistently smooth
shave, the device must be cleaned and
maintained regularly.

Cleaning after every dry shave

1. Press both release buttons4 and take

off the shaving foil frame2.

2. Tap the shaving foil frame2 carefully.
3. Clean the cutter blocks12 with the

cleaning brush14.

4. Place the shaving foil frame2 on the

device in such a way that it locks into
place.

Cleaning after every wet shave/
occasionally after dry shave

1. If necessary, wipe the device (not the

shaving foils1) with a slightly mois-
tened cloth.

2. Press the release button9. The shaving

head3 opens up.

3. Hold the device facing down and rinse

the cutter blocks12 and the shaving
foil frame2 in the shaving head3 un-
der running water.

4. Allow the parts to dry completely.

• Depending on the intensity of usage,

but at least every 6 months, carefully
spread a small amount of sewing ma-
chine oil on the shaving foils1, the cut-
ter blocks12 and the long hair
trimmer11.

8. Storage

DANGER! Keep the device out of
the reach of children.

• When the device is not being used,

place the protective lid10 on the shav-
ing head3.

• The device and accessories can be

stored in the storage bag15.

9. Replacing shaving

foils/cutter blocks

WARNING! Do not use the device if the
shaving foils1 are damaged.
NOTE: replacement shaving foils and cut-
ter blocks can be ordered:
-

on www.hoyerhandel.com

-

or at the service centre hotline (chapter
"Warranty of HOYER Handel GmbH" on
page 55)

The shaving foils1 and the cutter blocks12
must be replaced, …
… when you can see signs of damage,
… when you feel pinching when shaving

or if the shave is not close, and if this is
not remedied by oiling of the shaving
foils1 and the cutter blocks12 (see
chapter "Cleaning and maintenance of
the device" on page 51) and

… depending on the intensity of use, but

generally after one year.

1. Figure A: press both release but-

tons4 and take off the shaving foil
frame2.

2. Press the release button9. The shaving

head3 opens up.

GB_KRA100057_Herrenrasierer.fm Seite 52 Dienstag, 27. Mai 2014 2:46 14

Advertising