Silvercrest SBT 3.6 A1 - Manual (Page 48)

45 SBT 3.6 A1
GB
NOTE
► To order replacement parts, please contact the service department (see chapter
"Warranty and service"). Please have the IAM number ready (see operating
manual cover).
Storage
■ Always protect the micro shaver 3 with the supplied protective cap 2.
■ Store the appliance, the trimming templates o, the cleaning brush z and the
mains adapter t in the storage bag u.
■ Store the appliance in a dry and dust-free location.
Troubleshooting
Problem Cause Solution
The appliance is
not working.
The battery is empty. Charge the battery.
The appliance is
defective. Contact the Customer Service
department.
The appliance
only runs slowly.
The battery is empty. Charge the battery.
The epilation of
the hairs is very
painful.
The hairs may be too
long. Shorten the hairs to about 0.3 - 0.5 cm.
See also the section "Tips and Tricks".
Not all hairs are
plucked.
It is possible that the
hairs are too short. The hairs should have a length
of 0.3 - 0.5 cm.
You are working too
fast. Move the appliance more slowly over
your skin.
IB_95827_SBT3.6A1_LB2.indb 45 26.09.14 13:22