Silvercrest SZA 28 B2 - Manual (Page 13)

10 SZA 28 B2
GB
Connecting the indoor aerial
Connecting to a TV
♦ Connect the aerial cable 2 from the indoor aerial to the aerial con-
nection on your television. The aerial cable 2 from the indoor aerial
cable can only be connected directly to the television if the television
has an integrated DVB-T tuner.
Connection as a radio aerial
♦ If you use the indoor aerial for radio reception, please use the coaxial
socket/coaxial socket adapter 9 .
♦ Connect the coaxial socket/coaxial socket adapter 9 to the indoor
aerial 2 .
♦ Connect the aerial cable 2 with the coaxial socket/coaxial socket
adapter 9 to the 75 ohm connection on your hifi system.
Connecting to a DVB-T receiver
♦ Connect the aerial cable 2 from the indoor aerial to the aerial con-
nection on your DVB-T receiver.
♦ To connect the indoor aerial to a DVB-T receiver with an F connector,
you will need to use the F connector/coaxial socket adapter 8 .
♦ Connect the F connector/coaxial socket adapter 8 to the indoor aerial 2 .
♦ Screw the aerial cable 2 with the F connector/coaxial socket adapter 8
to the F connector on the DVB-T receiver.
NOTE
► After the device has been connected, you can control the signal strength
and quality via the DVB-T receiver. If you still do not have a suffi cient
picture quality, reposition your device at a better location.
Switching the device on/off
♦ To switch the indoor aerial on, move the On/Off switch 3 to the
"ON" position.
♦ To switch the indoor aerial off , move the On/Off switch 3 to the
"OFF" position.
IB_93403_SZA28B2_LB4.indb 10 IB_93403_SZA28B2_LB4.indb 10 05.12.13 11:35 05.12.13 11:35