Powerfix Z29948 - Manual (Page 28)

28 GB/MT
Introduction
Multi-Purpose Detector
Q 
Introduction
Before assembling and using the device for the
first time, take time to familiarise yourself with
the product first. Read the following assembly
instructions and safety instructions carefully. Only use the
product as described and for the designated areas of ap-
plication. Please keep these instructions in a safe place. If
you hand this product on to a third party, you must also
pass on all documents relating to the product.
Q 
Proper Use
This device is intended to be used for detecting metal and
live electrical wires. Other uses or modification of the device
shall be considered as improper use and may lead to dan-
ger, e.g. risk of personal injury or damage to the device.
The manufacturer will not accept liability for loss or dam-
age arising from improper use. The device is not intended
for commercial use.
Q 
Description of Parts
1 Measuring head
2 Red LED
3 Function switch METAL / VOLTAGE
4 PUSH button
5 Battery compartment
Q 
technical data
Measurable voltage range: 220 - 240 V ~, 50 Hz
Detection depth: approx. 40 - 50 mm
Battery: 2 x 1.5 V , AAA
Ambient conditions:
Temperature:
10 - 40°C
Humidity: 20 - 90 %
Dimensions: 160 x 58 x 35 mm
(L x B x D)
Weight: approx. 106 g (without
batteries)