Powerfix Z30590-BS - Manual (Page 10)

12 GB
Use / Maintenance and cleaning / Troubleshooting
 ATTENTION! If the LED work lamp is connected to the mains supply
via an adapter, it is only suitable for indoor use.
 Maintenance and cleaning
The product requires no maintenance. The LEDs cannot be replaced.

Disconnect the product from the power supply before you clean it.

Clean the product regularly with a dry, fluff-free cloth. Use a slightly
moist cloth to remove any stubborn dirt.

Do not use corrosive cleaning agents.

Never immerse the product in water or other liquids.
 Troubleshooting
Fault Possible causes and cures
No
functions - Is the mains adapter or cigarette lighter socket adapter
fully inserted?
Charging
indicator
does not
light up When connected to a cigarette lighter socket:
- Is the cigarette lighter socket supplied with power?
Some cigarette lighter sockets only supply power with
the ignition switched on.
- Check the fuse in the vehicle.
56301_pow_LED_Stableuchte_Content_LB4.indd 12 06.10.10 10:52