Powerfix Z30590-BS - Manual (Page 9)

11 GB
Use
 Use
 When using the LED work lamp in a vehicle make sure that you do
not endanger the driver or the passengers. Store and secure the
LED work lamp in such a way that, even under conditions of full
braking, there is no danger of damage to the product or personal
injury.

Fully charge the rechargeable batteries for the LED work lamp as
described in the section called “Recharging the rechargeable
batteries for the LED work lamp”.

Press the on / off switch 4 (position I) to switch the LED work lamp on.
 Using the LED work lamp connected to a
power supply
 Arrange the power lead so that it does not create a trip hazard.
 CAUTION DANGER OF ACCIDENT! Do not connect or use
the LED work lamp if you are in moving traffic, for example driving
a vehicle. The LED work lamp is not a passenger compartment
light or a reading light!

Pull the protective rubber pad 5 out of the bottom of the
LED work lamp handle.

Insert the connection plug of the mains adapter 2 or the connection
plug of the cigarette lighter socket adapter 3 into the connection
socket in the LED work lamp handle.

Insert the mains adapter into a 230 V ~ mains socket or insert
the cigarette lighter socket adapter into the cigarette lighter
socket in your vehicle.

Press the On / Off switch to switch on the LED work lamp.
56301_pow_LED_Stableuchte_Content_LB4.indd 11 06.10.10 10:52