Epson PowerLite 1715c - Manual (Page 83)

Presenting Through a Wireless Network 83
5. To allocate projectors to each display, choose a number from the
menu under Display .
6. Click the Connect button when you are ready to project the
image.
7. You can use the Screen Preview button on the NS
Connection toolbar to check the image on each screen.
Projecting Video Clips
You can project full-screen MPEG2 video clips with audio in real time
(30 frames per second). For best performance, advanced wireless
mode, 802.11g, or 802.11a are recommended.
1. Click the Movie Sending Mode button on the NS
Connection toolbar.
2. If you are connected to more than one projector, select the one
you want to use for the video.
note
Only MPEG1-Layer2
audio is supported. The
maximum supported
MPEG2 video resolution
is 720 × 480 NTSC or
720 × 756 PAL (without
audio).