Earlex IS2000 - Manual (Page 8)

Fitting the Steam Unit (1) to the Caddy (18)
Slide the Steam Unit into the center of the Caddy until the yellow Steam
Unit release latch (24) locks into place. To remove, press the Steam Unit
release latch down and slide the Steam Unit backwards.
Storing the Handle (11), Hose (10) & Power
Cord (17)
With the Steam Handle uncoiled in front of the unit
take the Power Cord, and coil it tightly around the
base of the Steam Unit above the steam hose
outlet so that after 4
1 /
2
turns the plug can be stored in the front recess (22). Then coil the hose 1 1 /
2
turns until the Handle parks into its Holster (2). Press down the Handle Release Button (12) and push
the Handle into the Holster so that the release button locks into its location. To remove, simply depress
the release button and withdraw the Handle.
Storing and removing Extension Tubes (25)
Slide the Extension Tubes into the front of the Caddy, button end
first and slide the tubes through the Caddy until the Release
Button (20) aligns and fits into the location (19). To remove, simply
depress the release button and withdraw the Extension Tube.
Note: It will be easier to do this when the main attachments are
not stored in the Caddy.
Using the Shoulder Strap (33)
The Strap is used for the hand held function to
enable the user to carry the Steam Unit over the
shoulder. To unfasten the strap, release the popper
(6) and pull the strap out at the front end of the
Steam Unit until it is fully extended. The Steam Unit can now be hung over your shoulder.
Fitting the Extension Tubes & Attachments
There are 3 Main Attachments (27, 28, 29), 3 Mini Attachments (14, 15, 16), 2 Extension Tubes and
a Garment Attachment Rest to use with your Steam Dynamo Pro, depending on the job you want to
do. All attachments are fitted either to the Extension Tubes or directly to the Handle, which ever is
most suitable for the task in hand.
● The Main Attachments and the Extension Tubes fit over the release button.
● The Mini Attachments push tightly over just the front portion of the Handle or Extension Tube.
8
PREPARING YOUR STEAM DYNAMO PRO FOR USE
HELPLINE NUMBER - TOLL FREE 888 STEAM 12. CALL FIRST IF YOU HAVE ANY PROBLEM