Powerfix PHG 2500 C3 - Manual (Page 39)

36 PHG 3000 C3
GB
Electrical connection
For safe and faultless operation of the appliance after electrical connection
observe the following advice:
TAKE NOTE
► Before connecting the appliance compare the connection data (voltage
and frequency) on the rating plate with that of your mains power supply.
This data must be in agreement so as to avoid damage to the appliance.
► Make sure that the mains power cable is not damaged and is not running
over hot surfaces and/or sharp edges.
► Make sure that the mains power cable is not stretched or knotted.
♦ Insert the plug into a mains power socket.
Operating components
Stand with carry handle
2 Operating switch
3 Temperature regulator
4 Mains power cable
Handling and operation
In this chapter you receive important information for the handling and operation
of the appliance.
Operating switch
The operating switch 2 has 4 positions and switches the ventilator and the
heating levels on and off .
= Appliance switched off
= only ventilator
= Ventilator and heating level 1
= Ventilator and heating level 2
Temperature regulator
The temperature regulator 3 is steplessly adjustable.
By turning it clockwise a higher temperature is set, by
turning it anti-clockwise a lower temperature will be set.
IB_100098_PHG3000C3_LB2.indb 36 12.06.14 12:22