Powerfix PHG 2500 C3 - Manual (Page 42)

39 PHG 3000 C3
GB
Troubleshooting
In this chapter you will receive important information for malfunction localisation
and remedies.
WARNING
Observe the following safety information to avoid risks and property damage:
► Repairs to electrical appliances may only be carried out by specialists who
have been trained by the manufacturer. Considerable risks for the user and
damage to the appliance can occur as a result of incompetent repairs.
Malfunction causes and remedies
The following table will help with localising and eliminating minor malfunctions:
Defect Possible cause Solution
The appliance
will not switch
on.
The plug is not connected.
Connect the plug with a mains power
socket.
The mains power socket is not
providing power.
Check the house fuses.
The appliance
is not provid-
ing heat.
Operating switch 2 is not
switched on.
Temperature regulator
3 is at the
MIN position.
The heating element is defective.
Set the operating switch 2 at the
desired mode.
Set the temperature regulator
3
at the MAX position.
Get in touch with Customer Services.
NOTICE
► If you cannot solve the problem with the aforementioned methods please
contact customer service.
IB_100098_PHG3000C3_LB2.indb 39 12.06.14 12:22