Hotpoint Ariston SI E40 BA0 User Manual

Page 6

Advertising
background image

6

• Il ferro da stiro è equipaggiato con un sistema di sicurezza Power off

system. Dopo l’inserimento della spina nella presa di corrente, è suffi-

ciente spostare il ferro per attivarne l’accensione.

en

GENERAL SAFETY INSTRUCTIONS

• Do not operate the iron in case of damaged plug, power cord or

appliance, or in the presence of visible damage or water leaks from

the appliance. In such a case the appliance must be inspected by

the Hotpoint authorized technical staff in order to avoid dangerous

situations.

• If the appliance was dropped, do not operate it.

• The appliance is not intended to be used by individuals (children

included up to 8 years of age) with impaired physical, sensory or mental

capabilities, inexpert individuals or individuals who are not familiar with

the product, unless they are supervised by a person responsible for their

safety, or by individuals who have not received preliminary instructions

on the use of the appliance.

• Supervise children to prevent them from playing with the appliance.

• Never leave the appliance unattended when the plug is connected into

the electrical socket.

• After each use of the appliance, when filling and emptying the water

reservoir, as well as when cleaning the appliance, set the steam

regulator to Off. Then place the appliance in a stable position, using the

stand, and disconnect the plug from the electrical socket.

• The appliance must be used and placed on a stable, flat horizontal

surface. The use on an ironing board is recommended.

• For your safety, all repairs or maintenance operations must be carried

out exclusively the the Hotpoint authorized technical staff.

• Keep the iron and its cord out of reach of children less than 8 years of

age when it is energized or cooling down.

• Cleaning and user maintenance shall not be made by children without

supervision.

• When placing the iron on its stand, ensure that the surface on which the

stand is placed is stable.

• The plug must be removed from the socket-outlet before the water

reservoir is filled with water.

Advertising
This manual is related to the following products: