Encore electronic ENNHD-1GS - Manual (Page 35)

Network
The Network page allows users to:
1. Configure general device information
2. Configure the network setting for the device.
To open the Network page, click the Network on the configuration categories list.
Host- Host Name Setting
Host Name (1~15 characters):
Define the user-defined device name.
Workgroup (1~15 characters): Defines the workgroup name for the device
which is going to be shown on “Network
Neighborhood”
Description (1~48 characters): Define a note for the device.
IP Address- IP address Setting
To Enable DHCP Client
Click “Enable” to enact this device as a DHCP client and click “Disable” to
disqualify.
To Configure the IP Addresses for the Device
34