Encore electronic ENNHD-1GS - Manual (Page 50)

Restart the System
This column allows users to restart the system. To perform system restarting, click
the “Restart” button.
Reset to Factory Default
To restore the factory default configuration for the device, click the “Set to Default”
button to execute.
Note:
1. All the user-defined configurations will be erased and replaced as factory default
setting.
2. We recommend users to backup the configuration status before restoring factory
default. To get more information for backup your configuration, see “Backup the
Device Configuration Status”
Sleep mode
This device supports Sleep Mode, which stops the device temporarily while there are
no operating on the device for a certain period of time. To enable Sleep Mode, click
on the drop list to specify a time and click “Apply” to execute.
System Shut Down
To turn off the device, click on the shutdown button and wait the device to turn off
automatically.
49