MCZ Tube 2013 - Manual (Page 20)

1
18
5-INSTALLATION AND ASSEMBLY
The product must always remain in a vertical position and handled solely with a cart. Pay particular attention to the door and its glass,
protecting them from mechanical knocks that would compromise their integrity.
In any case, the product must always be handled with care. If possible, unpack the product near the place of installation.
The packaging materials are neither toxic nor harmful, and therefore no particular disposal measures are required. Therefore, the end user
is responsible for product storage, disposal or possible recycling in compliance with the relative applicable laws. Do not store the unit or
the cladding without their packaging.
Position the product and connect it to the chimney. If the product must be connected to an exhaust pipe that goes through the rear wall
(to enter the chimney), make sure not to force it in. Adjust the 4 feet (J) to level the stove for the smoke exhaust and the pipe to be coaxial.
The feet are adjusted by lifting the product slightly.
Attention!
Do not use and/or force the smoke exhaust pipe when handling the stove as it can be damaged.
1. TURN THE FOOT CLOCKWISE TO LOWER THE STOVE
2. TURN THE FOOT ANTI-CLOCKWISE TO RAISE THE STOVE
1 - SMOKE OUTLET
FOOT J