Connections, Operation – Emerson EK215 User Manual

Page 6

Advertising
background image

5

CONNECTIONS

CONNECTING THE UNIT TO A HOME STEREO

From

Aux

Out

To

Aux In

RECEIVER OR HOME STEREO

NOTES FOR CONNECTING TO A

RECEIVER/HOME STEREO:

• Connecting the unit to a receiver/home

stereo will allow you to broadcast the
unit’s sound through the receiver/home
stereo's speakers.

• When connecting the unit, refer to the

owner’s manual of the receiver/home
stereo, as well as this manual.

• When connecting the unit, make sure the

power is off and both units are unplugged
before making any connections.

CONNECTING THE MICROPHONE(S)

This unit has two microphone jacks, use with the supplied microphones which will allow you to sing along
with your favorite songs. Before connecting, make sure the MIC VOLUME control is set to minimum.
If only connecting one microphone, connect it to the MIC A jack.

HEADPHONE JACK

For private listening, connect low impedance 3.5mm (32 ohm) stereo headphones (not included) to this jack.
The speakers are automatically disconnected when the headphone plug is inserted in the jack.

OPERATION

Rotate the ECHO control clock-
wise to increase the echo or
counterclockwise to decrease the
echo.

1

ECHO CONTROL

Rotate the TONE control clock-
wise to increase the higher tone
response.

1

TONE CONTROL

To turn the microphone on, slide
the ON/OFF switch, located on
the side of the microphone, to the
ON position. To turn the
microphone off, slide the ON/OFF
switch to the OFF position.

1

MIC ON/OFF SWITCH

EK215 KARAOKE O/M.QXD 8/15/02 3:42 PM Page 5

Advertising