MCZ Mondrian User Manual
Page 7
INSTALLATION AND USE MANUAL
Chapter 3
MONDRIAN
page
7
Chapter 3
Technical service – all rights reserved by mcz spa
Reproduction prohibited
3.2. PHASE 1 - POSITIONING OF FIREPLACE STOVE FORMA PURO65
Place the Forma Puro in the desired position and at a safe distance from the rear wall. Raise the fireplace stove
so that the height of the edge-cover profile from the floor is 250 mm (=height of fire bed of cladding). Minimum
height variations may be made a second time, if necessary, during installation of the cladding.
N.B. It is necessary to create a support base upon which to fasten the Forma Puro65. The unit must
be stable and firmly in contact with the floor.
PROFILO
COPRIBORDO
DISTANZA
PAVIMENTO
BASE APPOGGIO
FORMA PURO
DI SICUREZZA
25
0
Install the unit Forma Puro65 in accordance with the instructions in the respective
Manual for Installation and
Use and run a quick test for proper operation. If the test is successful, you can install the Mondrian cladding.