MCZ Picasso User Manual
Page 7
INSTALLATION AND USE MANUAL
Chapter 3
PICASSO
page
7
3
Technical service – all rights reserved by mcz spa
Reproduction prohibited
3.2. PHASE 1 - POSITIONING OF FIREPLACE STOVE FORMA PURO75
Place the Form Puro75 in the desired position and at a safe distance from the rear wall. Raise the
fireplace stove (by means of the 4 available feet) so that the height of the edge-cover profile with respect to the
floor is 165 mm (= height of fire bed of cladding).
A second adjustment of the unit, if necessary, is made
during assembly of the cladding.
Before proceeding with the connection to the flue pipe and with complete installation of the fireplace stove,
check the correct position of Forma Puro75 with respect to the steel structure(1) of the Picasso cladding. When
the check is complete, install the unit Forma77 in accordance with the instructions in the respective
Manual for
Installation and Use and run a quick test for proper operation. If the test is successful, you can install the Picasso
cladding.
PAVIMENTO
PAVIMENTO
PROFILO
COPRIBORDO
DISTANZA DI
SICUREZZA
16
5
16
5