Extron Electronics MTP U R RS - Manual (Page 24)

MTP U R Series • Installation
N
A 2-nanosecond (ns) adjustment is very fine. Up to
10 ns of delay may be necessary before a change in the
display is detectable. Maximum delay possible is 62
nanoseconds.
c . Use a Tweeker or other small screwdriver to press the
Select button one more time to save the most recent
adjustment or allow the 10-second timeout to elapse.
4. If the remaining color is left shifted, repeat step 3.
Non-SEQ receivers skew compensation
Try using the following methods to minimize or eliminate pair
skew:
• Switch to Extron’s Enhanced Skew-Free A/V UTP cable.
• Add a skew compensation cable equal to the length of
pair skew to the receiver’s output.
• Install an SEQ 100 15HD Skew Equalizer on the receiver’s
video output and adjust the skew for the leading video
image.
21