Extron Electronics MTP U R RS - Manual (Page 13)

MTP U R Series • Installation
Installation, cont’d
10
MT P SE RI ES
Figure 9 — Attaching the back of the rack kit
1 . Remove feet from the bottom of the MTP if they are
installed.
2 . Remove two screws from one side of the unit. Retain the
screws for possible later reassembly without the bracket.
3 . Attach one bracket to the side of the unit using the longer
screws included in the kit.
4 . Repeat steps 2 and 3 on the other side of the unit.
5 . Mount the unit to the rack using the two included rack
screws (figure 10). The MTP can be vertically mounted
facing in either direction.
MA V SERIES AV MA TRIX SWITCHE
R
I/O
AUD
AUD IO S ETU P
PRE SET
VID
IR
+dB
-dB
ENT ER
2
7
6
5
2
4
1
INPUTS
OUTPUTS
8
3
1
8
6
5
4
3
7
M T P S
E R IE
S
Rear
Front
Figure 10 — Typical back of the rack installations