MEDC FB4 - Manual (Page 7)

2 Signifies suitability for use in a zone 1 area
G Signifies suitability for use in the presence of gases
D Signified suitability for use in the presence of dust
The ATEX certificate and product label also carry the following mark:
This signifies unit compliance to the relevant European directives, in this case 94/9/EC, along with the num-
ber of the notified body issuing the EC type examination certificate.
6.0 SPECIAL CONDITIONS FOR SAFE USE
1. For replacement purposes, the cover fixing screws shall be of stainless steel, minimum grade A4-80
2. Any cable entry device used with the equipment shall be suitable for the entry arrangement and maintain
the ingress protection level IP6X
1180
© Cooper MEDC 2010 12/10