Meliconi Gumbody Facile Smart User Manual

Page 2

Advertising
background image

+

1. Switch on the TV.

2. Look for the brand of your TV in the Code Book and make

a note of the corresponding code indicated alongside (

e.g.

Philips 0025).

3. Hold down the MUTE and ON/OFF keys together for 5

seconds until the light indicator starts to flash indicating
that the remote control is being programmed.

4. Release the keys and within 12 seconds enter the make

code previously identified (

e.g. 0025). The light indicator

flashes more quickly to indicate that the remote control
is ready for the search.

5. Point the remote control at the TV. Press and slowly release

the ON/OFF key several times, stopping when the TV
goes off.

6. When the TV goes off, press the OK key to confirm.

Three flashes indicate that the operation has been
completed correctly.

The quickest and easiest way to programme the remote control is

by consulting the website

www.meliconi.com/guide

.

HOW TO PROGRAMME THE REMOTE CONTROL

PHILIPS

0025

F I T T I N G T H E BAT T E R I E S

Before programming and using the remote control,

fit the batteries.

The remote control requires 2 new AAA/LR03 batteries. Insert the batteries as shown:

• Change the batteries if the light indicator starts to flash

during use. The batteries are low.

• When you remove the batteries, fit the new ones within

5 minutes or you may have to reprogramme your remote
control.

• Make a note of the code for your TV on the adhesive label

inside the battery cover in case you have to reprogramme
your remote control.

To display and make a note of the code memorized by means of the search,

follow the instructions described in the paragraph CURRENT CODE DISPLAY.

ADDITIONAL CHECK

Check that some of the other functions used on your original remote control are working correctly. If the
commands function incorrectly or erratically, you have probably entered a code for a similar remote control
but not the right one. In this case, repeat the search procedure starting from point 3, entering the code
previously used (e.g. 0025).

2

5 SEC.

+

+

+

Advertising
This manual is related to the following products: