Meliconi Speedy 2 combo - Manual

17
This universal remote control has the essential functions for the simplified use of an analogue or a digital
television combined with a satellite or terrestrial decoder - without having to switch between one appliance and
another. The dark blue buttons transmit the commands to the decoder while the light blue buttons control the
functions that correspond to the TV. If used with a digital TV, all the buttons control the same appliance.
BUTTON AND FUNCTION USE
FITTING THE BATTERIES
GB
Before programming and using the remote control, fit the batteries.
The remote control requires 2 new 1.5 V AAA/LR03 alkaline batteries. Insert the batteries as shown:
• The batteries must be changed once a year.
• Replace the batteries if the indicator light on the remote control starts to
flash during use. The batteries are low.
• This remote control has a permanent memory and does not lose the
programmed codes when the batteries are removed.
• Make a note of the code for your appliances on the adhesive label found
inside the battery cover. This note will be handy if you have to reprogram
your remote control.
Warning: do not expose the remote control to sources of excessive heat
Keep your Instructions Booklet for future reference.
To select the next programme.
Interrupts and restores the TV audio.
To reduce the TV's audio volume.
Numeric keypad.
Indicator light.
Button to exit the Teletext
and return to normal viewing.
TV ON button which is occasionally
needed to turn the TV on
To increase the TV's audio volume.
To select an external input
terminal to the TV.
Button to access the Teletext.
To select the previous programme.
ON/OFF to turn OFF the TV
and in some cases to turn it ON.
Thank you for choosing MELICONI.
OFF to turn the decoder off (STB).