Exmark Lazer Z XS - Manual (Page 23)

18
3.2.3 Starting Engine:
Brake must be engaged, motion control levers out (neutral lock position) and
PTO switch “OFF” to start engine. (It is not necessary for the operator to be in
the seat to start the engine.)
On a cold engine, place the throttle midway between the “SLOW” and “FAST”
positions and push choke lever forward into the “ON” position. Turn ignition switch
to the “start” position. Release the switch as soon as the engine starts.
IMPORTANT: DO NOT crank the engine continuously for more then ten (10)
seconds at a time. If the engine does not start, allow a 60 second cool-down
period between starting attempts. Failure to follow these guidelines can
burn out the starter motor.
After starting a cold engine, gradually return choke to the “OFF” position as the
engine warms up.
On a warm engine, place the throttle midway between the “SLOW” and “FAST”
positions and leave the choke in the “OFF” position.
3.2.4 Engaging PTO:
DANGER
POTENTIAL HAZARD
♦ The rotating blades under the mower
deck are dangerous.
WHAT CAN HAPPEN
♦ Blade contact can cause serious injury or
kill you.
HOW TO AVOID THE HAZARD
♦ DO NOT put hands or feet under the
mower or mower deck when the blades
are engaged.
DANGER
POTENTIAL HAZARD
♦ An uncovered discharge opening will
allow objects to be thrown in an
operator’s or bystander’s direction. Also,
contact with the blade could occur.
WHAT CAN HAPPEN
♦ Thrown objects or blade contact can
cause serious injury or death.
HOW TO AVOID THE HAZARD
♦ Never operate the mower with the
discharge deflector raised, removed, or
altered unless there is a grass collection
system or mulch kit in place and working
properly.
The PTO push-pull switch engages the cutting blades. Be sure that all persons
are clear of the mower deck and discharge area before engaging PTO.