Precision Flight Serial CAT II and Microsoft Flight Simulator 9 (2004) - Manual (Page 8)

CAT 2 System and FS2004 Set Up Guide 8 | P a g e
NOTE:

If you do not have PFC Cirrus Rudder Pedals the Pedals-Rudder Control Connection will not
turn green

If you do not have avionics panel the Avionics /Radio Stack Connection will not turn green

If you do not have The PFC Mode Control Panel (MCP) the Mode Control Panel (MCP)
Connection will not turn green .

If you do not have the Project Magenta CDU the Project Magenta CDU connection will not
turn green.
16. Now that all the controls that are applicable to you have checked OK, click on Continue FS.
17. Now press the ALT key on your keyboard go to Add-On then PFC
18. In the Precision Flight Controls window, choose Flight Controls.
E. Enable and Calibrate Flight Controls
Enable Flight Controls
1. Now choose the Flight Controls.
2. Now enable the Elevator and Aileron, by clicking on the enable box which is opposite of the F for
filter box.