Primare CD32 CD player - Manual (Page 6)

C d 3 2 u s e r g u i d e

advanCed features
This chapter explains how to use the more advanced features of the CD32, and
how to play audio files from a USB disk. These functions are accessed from the
remote control.
C h a n g i n g t h e f r o n t
p a n e l d i s p l a y
You can choose how the time is shown on the
front panel display, and change the brightness.
To change the time display
• Press the DISP button..
The display switches between the following four
options:
Elapsed time for the current track
3:45
Remaining time for the current track
1:15
RT
Elapsed time for the entire disc
ALL
18:45
Remaining time for the entire disc
ALL
41:15
RT
To change the front panel display brightness
• Press the DIM button to step through the
three levels of illumination and blank.
The display auto-dims after a few seconds and
returns to the selected brightness when you
operate any control.
r e p e a t p l a y b a C k
You can play the current track repeatedly, or
repeat the entire disc.
To repeat the current track
While the disc is playing:
• Press the REPEAT button.
The front panel shows the symbol and TRK.
To repeat the entire disc
•
Press the REPEAT button twice.
The front panel shows the symbol and ALL.
To turn off repeat
• Press the REPEAT button again.
The symbol in the display will be cleared.
s h u f f l e p l a y b a C k
Shuffle playback plays the tracks on the disk in
random order.
To play the tracks in random order
While the disc is playing:
• Press the blue B button.
The front panel shows the symbol:
In shuffle mode you can pause a track by pressing
the >/= button or skip a track by pressing the ]
button.
To turn off shuffle
• Press the blue B button again.
The symbol in the display will be cleared.
p l a y i n g a s p e C i f i C
t r a C k
You can play from any track by entering the track
number on the remote control.
To play from a specific track
• Specify the track number by pressing one of
the buttons 1-9.
To enter a two-digit track number press the +10
button first. For example, to enter 16 press the
+10 button followed by the 1 and 6 buttons.
u p s a m p l i n g
The CD32 allows you to upsample the 44.1kHz
signal from a CD to either 48kHz or 96kHz, which
improves fine detail, sound stage depth and image
separation.
• Press the red R button to select between
44.1K, 48K, and 96K (recommended).