Primare SP33 av preamp - Manual (Page 4)

s P 3 3 u s e r g u i d e

1 u n P a c k t h e s P 3 3
Your SP33 is supplied with the following
components:
• Mains cable.
• C24 remote control.
• Two button cells for the remote control.
If any of these items are missing please contact
your supplier. We recommend you retain the
packaging in case you need to transport the unit
at a later date.
 c o n n e c t a d i s P l a y
Connect the HDMI 1 or HDMI 2 output from
your SP33 to your television or display HDMI
input.
For more information see Video connections,
page 3.
3 c o n n e c t t o
s P e a k e r s
The SP33 can drive up to seven full-frequency
channels and one subwoofer. If your surround
system does not include a full set of speakers,
the SP32 will distribute the signals from these
channels to the other channels as appropriate in
your system.
•
Connect the front, centre, surround, and
surround back outputs to the corresponding
inputs on the amplifiers.
• If your system includes a subwoofer, connect
the sub main output to the audio input of the
subwoofer.
 c o n n e c t s o u r c e s
The SP33 is supplied with seven standard sources
already configured; see
Selecting a source, page 5.
Alternatively you can configure up to 15 sources
to use the particular combination of analogue,
digital, and video input you prefer; for more
information see
Input setting, page 8.
5 c o n n e c t P o W e r
•
Connect the SP33 to a wall socket, using the
supplied mains cable.
• Switch on the SP33, using the switch next to
the power connector on the back panel.
• Press the O button to switch on the SP33.
The button indicators will light up, showing the
function of the two controls and four buttons on
the front panel.
6 c o n f i g u r e t h e
s P e a k e r s
Before using the SP33 you need to configure it to
specify the combination of speakers you have in
your surround system. For more information see
SPEAKER SETTING, page 10.
You then need to set up the speaker levels and
speaker distances, to ensure that the sound image
is correctly focused at the listening position. For
more information see
LEVEL ADJUST, page 10,
and SPEAKER DIST, page 11.
7 P l a y a s o u r c e
• Use the SELECTOR control on the front
panel or the A and V buttons on the remote
control to select the source.
• Use the VOLUME control on the front panel
or the VOL + and VOL – buttons on the
remote control to increase or decrease the
volume.
For more information about playing sources see
Selecting a source, page 5.
getting started
Set up your SP33 in seven simple steps: