RISCO Group RP128EZ01 - Manual (Page 4)

-4-
Programming a RP128EZ01 Wired to a BUS Zone Expander
Step 1: Adding the BUS Zone Expander to ProSYS
QUICK KEYS = [7][1][2]
1. From the main installer menu press [7][1][2] to enter the Add BUS zone expander menu.
2. Using the
/ keys select a BUS Zone Expander ID.
3. Using the / keys move to Type. Use the key to select a type (BZE08,
BZE16, BZE24 or BZE32 zone expander) based on the DIP switches you set on the
expander. Press .
4. Using the key, select type iQUG3 for any RP128EZ01 connected to this BUS zone
expander.
Note:
The display shows "(x:yy) Type: None" . In the x:yy designation, the x represents the BUS Zone Expander ID
number and the yy represents the RP128EZ01 ID number that is connected to the zone expander, as set by
the RP128EZ01 's DIP switches.
5. Press to move to the next RP128EZ01.
Step 2: Assign BUS Detectors to a Zone ID and set basic parameters
1. From the main installer menu press [2] to enter the Zones menu.
2. Using the
/ keys, select [ONE BY ONE] and press .
3. Using the numeric keys, select a zone number whose designation (x:yy) is equivalent to
the one defined for the ProSYS BZ1. (The x represents the BUS Zone Expander ID number
and the yy represents the ProSYS BZ1 ID number as set by its ID DIP switches).
Press
to access the Partitions category.
4. Define Partitions, Groups, Zone Type and Zone Sound.
5. In the Termination category select one of the following options: BUS Zone Input N/C, BUS
Zone Input EOL, BUS Zone Input DEOL, BUS Zone Input N/O, BUS Zone Input TEOL.
Press
6. Press . Select the iQUG3 (x:yy) that the RP128EZ01 belongs to. The Type field will
be updated automatically when selecting the zone.
7. Press . Define the loop response time.
8. Press , assign a label and press .
9. Repeat steps 3-10 for all required RP128EZ01 expanders
Technical Specifications
Power Supply 13.8V
Current Consumption 20mA
Contacting RISCO Group
RISCO Group is committed to customer service and product support. You can contact us through our website
www.riscogroup.com or as follows:
United Kingdom
Tel: +44-161-655-5500
[email protected] France
Tel: +33-164-73-28-50
[email protected] Brazil
Tel: +55-11-3661-8767
[email protected] Singapore
Tel: + 65-66222388
[email protected]
Italy
Tel: +39-02-66590054
[email protected] Belgium (Benelux)
Tel: +32-2522-7622
[email protected] China (Shanghai
Tel: +86-21-52-39-0066
[email protected] Poland
Tel: +48-22-500-28-40
[email protected]
Spain
Tel: +34-91-490-2133
[email protected] USA
Tel: +1-631-719-4400
[email protected] China (Shenzhen)
Tel: +86-755-82789285
[email protected] Israel
Tel: +972-3-963-7777
[email protected]
All rights reserved.
No part of this document may be reproduced in any form without prior written permission from the publisher.
© RISCO Group 01/2011 5IN1110