Remote Processing BASIC for the CX-10 Modbus - Manual (Page 39)

BASIC PROGRAMMING GUIDE
2-30
LIST
Syntax: LIST
LIST line number
LIST line number - line number
Where: line number is a program line number
Function: Prints all or some of a program to the console.
Mode: Command
Use: LIST 10-100
Card: All
DESCRIPTION
The LIST command prints the program in RAM to the console device. LIST inserts spaces after the line
number and before and after instructions. Program listings are terminated with a <Ctrl-C>.
LIST line number lists the program line number to the end of the program. LIST line number-line number
lists the program from the first line number to the second line number.
RELATED
LIST#