Riello UPS MultiCOM 401 - Manual (Page 18)

18
Index Data type NOMINAL DATA UNIT
73
÷77
78
Unsigned16 Output nominal voltage (star) V
79
Unsigned16 Output nominal frequency 0.1*Hz
80
Unsigned16 Output nominal power 100*VA
81
÷83
84
Unsigned16 Battery nominal capacity (battery expansion included) Ah
85
Unsigned16 Battery benches (1 or 2)
86
Unsigned16 Battery type Integer
87
÷112
Index Data type COMMANDS UNIT
113
Unsigned16 Command code (1)
Integer
114
Unsigned16 Shutdown delay time Seconds
115
Unsigned16 Restore delay time Minutes
116
Unsigned16
117
Unsigned16 Command result (2)
Integer
118
÷120 Unsigned16
(1)
Refer to Command codes paragraph
(2)
Command result = Command code if command is handled from the UPS
Command result = Command code + 100 if command is NOT handled from the UPS
Command result = 0 if Command code is wrong
Index Data type SPECIAL FLAGS (SENTR UPS)
(3) UNIT
121
Unsigned16 Byte 1 of “s = xx..” code / Byte 2 of “s = ..xx” code Flag
122
Unsigned16 Byte 1 of “c = xx..” code / Byte 2 of “c = ..xx” code Flag
123
Unsigned16 Byte 1 of “b = xx..” code / Byte 2 of “b = ..xx” code Flag
124
Unsigned16 Byte 1 of “r = xx..-..” code / Byte 2 of “r = ..xx-..” code Flag
125
Unsigned16 Byte 3 of “r = ....-xx” code / Byte 1 of “i = xx..-..” code Flag
126
Unsigned16 Byte 2 of “i = ..xx-..” code / Byte 3 of “i = ....-xx” code Flag
127
Unsigned16 Byte 1 of “a = xx..-....” code / Byte 2 of “a = ..xx-....” code Flag
128
Unsigned16 Byte 3 of “a = ....-xx..” code / Byte 4 of “a = ....-..xx” code Flag
(3)
In order to decode these registers, please refer to the UPS manual
CODE COMMAND
1 (0x0001) Command shutdown
2 (0x0002) Command shutdown and restore
3 (0x0003) Cancel command codes 1, 2, 12
12 (0x000C) UPS on bypass
20 (0x0014) Battery test
22 (0x0016) Test panel