RIGOL DS6000 Series - Manual

1X: DC~7MHz
10X: DC~150MHz
1X: 50ns
10X: 2.3ns
CAT II: IEC Measurement Category II. Inputs may be connected to mains ( up to 300 VAC)
under Category II overvoltage conditions.
Cable Length
Ground Alligator Clip © 2007 RIGOL Technologies, Inc. All Rights Reserved.
1X: 1M 2
Ω
Ω ± %Ω
10X: 10MΩ ±2%
1X: 100pF 20pF ±
10X: 17pF±5pF
1X: CAT II 150V AC
10X: CAT II 300V AC
Frequency Compensation
Before taking any measurements using a probe
first check the
compensation of the probe and adjust it to match the channel
inputs.
-
.
,
Generally, the oscilloscope provides a calibration signal output
terminal at the front panel. Connect the probe to the signal output
terminal to display a square waveform on the oscilloscope and set the
probe attenuation to 10X.Adjust trimmer until seeing flat top square
wave on the display
Hook Tip
Maker Rings( yellow
)
, Pink,
light blue and dark blue
联系我们
如 您 在使用此产 品 的 过 程 中有任何问 题 或 需
求 ， 可与RIGOL联系：
服 务 与支持热线 ：
800 810 0002 或 400 620 0002
网 址 ：www.rigol.com
Contact Us
If you have any problem or requirement when using
our products, please contact RIGOL Technologies,
Inc. or your local distributors, or
visit: www.rigol.com.