RIGOL DS6000 Series - Manual (Page 2)

BNC Connector: Connect to the oscilloscope
measuring channel.
Ground Spring: Connect to the probe head for
grounding and better high
frequency response
.
Locating Sleeve: Cover the exposed metal part of the probe
head to avoid electricity leakage and protect the users.
Ground Alligator Clip: Use the
ground alligator clip to ground the
probe reliably for safe operation and
correct signal reading.
Maker Rings: Attach the matched color rings onto the probe
cable and shaft to identify different channels.
Adjustment Tool: Use the adjustment tool for
probe compensation adjustments.
C o m p e n s a t i o n T r i m m e r : Fo r
frequency compensation adjustment
in 10X mode.
Slide Switch: Use the slide
switch to set probe attenuation.
Hook Tip: Retractable hook tip.