RIGOL DSG3000 Series - Manual

RM-DSG3000 Installation Guide RIGOL
1
RM-DSG3000 Rackmount Kit
Product Overview
RM-DSG3000, the rackmount kit of DSG3000 series RF signal generator, as shown below, is
used to mount your generator into a standard 19-inch machine cabinet.
Kit Parts List
No. Name Qty. Description
1 Rack Mount 2
2 Rack Handle 2
3 M4 Screw 8 M4 x 8 Cross Recessed Pan Head Screw
4 M6 Screw 4 M6 x 16 Phil-Slot Pan Head Screw
5 M6 Nut 4 M6 x 5 Lock Blade Square Nut
3 4 5
RM-DSG3000 Installation Guide RIGOL
2
Space Requirements for Installation
The follow requirements must be fulfilled by the machine cabinet in which the instrument is
mounted.
 Dimension of the machine cabinet must be standard 19-inch.
 At least 2U (88.9 mm) space should be provided by the machine cabinet.
 The depth inside the machine cabinet should not be less than 450 mm.
The dimension of the instrument after being installed is shown below (the unit is mm).
Installation Tool
PH2 Phillips Screwdriver (recommended)