RIGOL DSG3000 Series - Manual (Page 2)

RM-DSG3000 Installation Guide RIGOL
3
Installation Procedures
CAUTION
Only authorized operators can execute the installation operation because
that the instrument will be damaged or installed in machine cabinet
incorrectly if the installation is not proper.
1. Install the rack handles: fix the two handles onto the two rack mounts respectively
using two M4 screws.
2. Install the rack mounts: aim the rack mounts at the screw holes and fix them with two
M4 screws respectively.
RM-DSG3000 Installation Guide RIGOL
4
3. Load into the machine cabinet: mount the rack with instrument fixed into a standard
19-inch machine cabinet using four M6 screws and square nuts.
Installation Cautions
The rack holds a height of 2U (1U=44.45 mm), and the holes pointed out by the arrows in
the figure below are the mounting holes for the rack which should be aligned when
installing.