ROCKINGER RO 810 D - Manual (Page 2)

ROCKI NG E R
Member of JOST-World
13
T Ta ab blle e o off c co on ntte en ntts s R RO O i i 8 81 10 0 D D
GB
Note:
When fitting the trailer coupling the Council Directive 89/173 EEC
and the relevant national regulations must be observed. The coupling
must be fitted in accordance with these assembly and operating
instructions.
If the installation of the trailer coupling should alter the load values of
the vehicle (e.g. permissible axle load, total weight, permissible vertical
load) the vehicle documents must be altered accordingly.
We reserve the right to make technical alterations.
Series RO i 810 B
Non-automatic trailer coupling with flange
– Type 810
Version A with socket pin above
Version B with socket pin below
– Hand lever l 30,2 mm
Safety instructions
14
1. Fitting
15
2. Operating
16
2.1 Hitching 16
2.2 Unhitching 16
3. Maintenance
17 – 18
3.1 Inspection 17 – 18
4. Technical data
19 – 21
Drawbar eyes
22
Single hand pins
22
!
The coupling may only be fitted by qualified
personnel!
Read these instructions carefully before
starting work!
The assembly and operating instruc-
tions must be kept in the vehicle!