Connecting interview to a pc, 2 connecting interview to a pc – EVGA InterView 200-LM-1700 User Manual
Page 13
Advertising
13
3.2 Connecting InterView to a PC
Before setting up InterView, you must power down your computer(s).
1. Connect the monitor to a computer(s) using the DMS to Dual DVI-I cord.
Note: You can use either the D-Sub plug or the DVI-D plug if there’s no available
DVI-I port on your PC.
2. Plug the power cord into the power adapter:
3. Connect the monitor to the electrical outlet using the power cord:
Advertising