Rose Electronics UltraView Remote 2 - Manual (Page 39)

ULTRAVIEW REMOTE 2 INSTALLATION AND OPERATIONS MANUAL 35
Keyboard Commands
Keyboard commands can be used to further customize the KVM switch module. These commands can be invoked
directly from a local or remote keyboard or from the “Command, Keyboard commands” tab on the VNC view toolbar.
(To use the keyboard commands, you must be connected via the VNC viewer, not the java applet)
The commands listed in the “Key sequence” column are direct keyboard commands, those in the “HotKey
Command” column are the key sequence string to add the “Command, Keyboard Command” tab on the VNC
viewer’s toolbar.
Command Key sequence Description HotKey Command
OSD menu <Ctrl> F12 Displays on-screen menus +-ctrl+-f12
CPU select <Ctrl> ESC List of CPUs to select +-ctrl+-esc
Select
computer <Ctrl> nnn where nnn
= computer number Connects the KVM station to
the selected computer.
+-ctrl+-nnn
Next computer <Ctrl> + Selects next sequential CPU +-ctrl+-+
Previous
computer <Ctrl> - Selects previous sequential
CPU.
+-ctrl+--
Scan ON <Ctrl> S Turns scan mode on +-ctrl+-s
Scan OFF <Ctrl> X Turns scan mode off +-ctrl+-x
Display label <Ctrl> D Turns CPU label on/off +-ctrl+-d
Logoff <Ctlr> L Disconnects from currently
connected computer.
+-ctrl+-l
Set mode <Ctrl> Mnn <Enter>
where nn = mode
value from Table 5. Alternate way to configure
keyboard and mouse.
N/A
Set resolution <Ctrl> Yn <Enter>
where n = resolution
value from Table 6 Alternate way to set screen
resolution when no video is
present from a CPU..
N/A
Screen saver
time <Ctrl> Vnnn <Enter>
where n = 0 –999 sec. Alternate way to set screen
saver time.
N/A
Null mouse
command <Ctrl> N Used to re-sync a PS/2
mouse.
+-ctrl+-n
Reset mouse <Ctrl> O (alpha O) Resets computer’s mouse. +-ctrl+-o
Reset
command <Ctrl> R Resets and enables mouse
and keyboard on currently
selected computer
+-ctrl+-r
Max computers <Ctrl> Pnnn Total ports used (all units) N/A
Units <Ctrl> Unn Number of expansion units. N/A
Width <Ctrl> Wnn Number of ports on
expansion units.
N/A
Keep <Ctrl> K Saves to flash memory. +-Ctrl+-k