Rose Electronics UltraLink 2 - Manual (Page 17)

UltraLink 2 Installation and Operations Manual 13
Secure Keys Menu
This screen uses your mouse movements or keyboard inputs to create random data. This
unpredictable information is then combined with several other factors to develop the basis
of the encryption keys that are used to establish secure remote links.
With every mouse move and key press the single dash will move across the screen (unless
the same key is pressed repeatedly). Periodically, a new star character will be added to the
bar as the random data are accepted as part of the new encryption key. When the bar is
full, the final encryption keys for your UltraLink-2 will be created – this process takes
roughly 30 to 40 seconds. Once the secure keys have been calculated the UltraLink-2 will
restart and present a standard logon screen.
When the Logon screen displays, all
remotely connected user will display
In this area (separated by a comma)
Enter the Username “admin” and the password entered on the configure unit menu. Upon
acceptance, the connected computer’s video will display on the local monitor. The unit is
now configured with the correct network and unit information for local and remote access.