Rose Electronics CrystalView DVI CATx - Manual (Page 16)

10
CRYSTALVIEW DVI CATx INSTALLATION AND OPERATIONS MANUAL
LED Indicators
Power (Red)
 Off – No power applied, device not ready
 On- Power applied, device ready
Data Error (Green)
• Off - No errors, device ready
• Blinking / On – Transmitter / Receiver communication not established,
cable to long, attenuation to high excess EMI interference
Link Status (Green)
• Blinking – No CATx cable connection detected
• On – Transmitter / Receiver communication established, device ready
Video OK (Green)
• Off – No video signal detected
• On – Video signal detected, device ready
NOTE:
The USB models only support USB keyboards and mice. Other USB
devices such as Touch Screen, graphic tablets, Barcode readers or
similar devices are supported but not guaranteed. Scanners, web cams,
USB drives, etc are not supported. The CrystalView DVI Fiber (USB
models) will only support two USB devices at the same time.
POWER DATA ERROR STATUS
VIDEO OK