Roth AV DBT-001 : FM/DAB+ Radio with Bluetooth Receiver - Manual (Page 7)

rothaudio.co.uk
|
7
User Manual
English
Ensemble/Multiplex (Group name)
The Ensemble/Multiplex is a collection of radio stations that are bundled and transmitted together in a single frequency. There are national
and local multiplexes, local ones contain stations that are specific to that area.
Note: Press and hold the INFO button for longer than 2 seconds, the software version number will be displayed.
FM radio
1. To select FM, repeatedly press the MODE button until you see “Switch to FM” is displayed, the display will show FM and the frequency.
2. To activate auto search, press and hold the Ok control until it starts to scan the frequency band, the display will show “Searching... > .” or
“Searching... < .”, and it will stop automatically once a station has been found. (Figure 6)(Figure 7)
3. To activate manual tuning, rotate the OK control.
4. To select the FM stereo/mono reception, press the Ok control to toggle between the “Auto” or “Mono” selection.
Note: The radio will automatically switch between the stereo and mono reception, but you can override this and switch this function
manually which is helpful for poor signal reception.
Storing and Recalling Stored Stations
In either DAB or FM mode, you can store up to 10 stations to the favourite presets; this will enable you to get direct access to your favourite
stations.
1. To store a preset, first tune to your desired station, then press and hold the MEMORY button, the display will show “Empty preset 1”, and
the preset number will flash. (Figure 8)
2. Rotate the Ok control to select your desired station preset number.
3. Press on the Ok control to confirm your selection, the display will show “Preset # saved” (Figure 9)
4. To recall a preset station, first press the MEMORY button once, then rotate the OK control to scroll up or down the presets that you
have stored. When the display shows your desired preset number, stop your rotation of the control. If the preset hasn’t been allocated a
station, the display will show “Empty preset #”.
Figure 6 Figure 7
Figure 8 Figure 9
DBT-001 Manual VJ.indd 7 7/8/12 13:23:15