Rugged Cams Fusion DVR - Manual

Quick
Reference
Guide
RUGGED CCTV
RUGGED CCTV
201 North Elm Street, Kemp, Texas 75143
1-866-301-CCTV
Phone: 903-498-3240 • Fax: 903-498-8989
www.rugged-cctv.com
[email protected]
Default Settings for the FuZion DVR
• All Cameras are enabled at 6 fps and a resolution of 352X240 and recording on
Motion Only
• Motion Detection if enabled is set to look at the entire screen and the
sensitivity is set to 9.
• Date and Time info (can be changed in the Menu under System and then go to
Set Date and Time)
o Date – internal time clock will bring up the correct date when system
is powered
o Time – set to Central Time
• Network Settings (Statically assigned through the Rugged CCTV test network)
o IP Address – 192.168.1.12
o Subnet Mask – 255.255.255.0
o Default Gateway – 192.168.1.1
o The DNS #’s completely left as 0’s
o These will more than likely need to be changed to be able to communicate
with the customers network
• Passwords can be modified in the Menu under Security
• Default Passwords
o Admin and 1111
o User and 1111
o Network password is 1111
• On the remote software – hit the connect button once the software is open, and input
the IP address, port # is 5445, protocol is TCP, and password is 1111.