Rugged Cams H.4 - Manual (Page 79)

1) PTZ Protocol Setting
PTZ protocol refers to the rule for communicating with the PTZ camera.
From the PTZ Setup menu, select the PTZ protocol for the channel you want to set using the
arrow keys and the Select button.
On the selection window, select the PTZ protocol using the arrow keys and the Select button.
2) Camera ID setup
Camera ID refers to the address used for communicating with the PTZ camera.
The camera ID must be the same as the ID set in the PTZ camera.
Different methods are used to set the address of the PTZ camera depending
on the camera manufacturer or model. Refer to the camera manual of each
manufacturer for the correct information.
From the PTZ Setup menu, select the camera ID for the channel using the arrow keys and
the Select button.
In the selection box, select the camera ID using the arrow keys and the [Select] button.
3) Setting the transmission rate
The transmission rate refers to the speed of communication with the PTZ camera.
The transmission rate must be the same as the communication speed of the
PTZ camera.
The transmission rates and setup methods for PTZ cameras vary by camera
manufacturer or model. Refer to the camera manual for details.
From the PTZ Setup menu, select the transmission rate for the channel using the arrow keys
and the Select button.
On the selection window, select the transmission speed using the arrow keys and the Select
button.