TA Triumph-Adler CX 8048 - Manual (Page 23)

2. 1 Turning on CX 8048
1. Ensure that the
CX 8048 is plugged into a dedicated wall outlet.
2. There is a Power Switch on the right side of
CX 8048.
Press its “ I ” side to turn on the
CX 8048.
Power Switch Press “| “ side.
Chapter 2 Basic Operation 2-2
WARNING
(1) Do not handle the Power Plug with wet hands, or you may receive an electrical shock.
(2) Make sure to earth the machine for safety.
(3) Do not plug the printer into a multi-wiring connector in which other devices are
plugged. It may overheat the outlet and may result in a fire.
(4) The outlet must satisfy the following conditions.
In U.S.A.: 120 V plus/minus 10%, 50/60 Hz and 15 A
In Europe: 220-240 V plus 6% or minus 10%, 50/60 Hz and 10 A