Safety and instructional decals, Safety – Exmark Vantage 000 & Higher User Manual
Page 10
Safety
Safety and Instructional Decals
•
Keep all safety signs legible. Remove all grease,
dirt and debris from safety signs and instructional
labels.
•
Replace all worn, damaged, or missing safety
signs.
•
When replacement components are installed, be
sure that current safety signs are affixed to the
replaced components.
•
If an attachment or accessory has been installed,
make sure current safety signs are visible.
•
New safety signs may be obtained from
your authorized Exmark equipment dealer or
distributor or from Exmark Mfg. Co. Inc.
•
Safety signs may be affixed by peeling off the
backing to expose the adhesive surface. Apply
only to a clean, dry surface. Smooth to remove
any air bubbles.
•
Familiarize yourself with the following safety signs
and instruction labels. They are critical to the safe
operation of your Exmark commercial mower.
1-303508
1-403005
98-5954
106-5517
1.
Warning—Do Not touch the hot surface.
109-3148
115-4186
1.
Interval
2.
Power Take-off (PTO)
3.
Parking brake
4.
Neutral
5.
Operator presence switch
6.
Battery
10