TA Triumph-Adler DC 6025 - Manual (Page 120)

6-32
Using Convenient Fax Functions > Polling Communication
Using Polling Reception with Sub Addresses
For polling reception, enter the sub address (on this machine, sub address and sub address password) set at the
sending machine. This communication is still possible when the other party is using a third-party machine provided it is
equipped with the same type of sub address communication function.
1
Press the FAX key.
2
Turn on polling reception.
To turn on polling reception, refer to Polling Reception on page 6-30.
3
Select the destination, and entering the sub address.
For the procedure for setting a sub address, refer to Sub Address Transmission on page 6-23.
For the procedure for selecting a destination, refer to Methods For Entering the Destination on
page 3-1.
4
Press the Start key.
Press the Start key. The operations for reception begin.
IMPORTANT
Check the sub address set by the sender beforehand.
NOTE
You can select destinations using a combination of numeric keys input, One-touch keys
selection and selection from the Address Book containing registered sub addresses.
NOTE
When On is selected in Entry Check for New Dest., a confirmation screen is displayed for
the entered FAX number. Re-enter the same FAX number and press [OK]. For details, refer
to Entry Check for New Dest. in the Operation Guide for the machine.