ELAN Home Systems U102110-07 - Manual (Page 27)

27
Conversion
All models are supplied set for use
on group H natural gas. A conversion
kit for LP gas is included with the
appliance. See the instructions that
are supplied with the conversion kit.
After converting the appliance please
attach the Gas Conversion sticker
over the appropriate area of the data
badge, this will identify the gas type
the appliance is now set for.
This appliance is designed
for domestic cooking only.
Use for any other purpose
could invalidate any
warranty or liability claim.
You will need the
following equipment to
complete the cooker
installation
satisfactorily
STABILITY BRACKET
If the cooker is to be supplied
with gas through a flexible
hose, a stability bracket or
chain must be fitted.
These are not supplied by
with the cooker but are
available at most builders’
merchants.
GAS PRESSURE TESTER
FLEXIBLE GAS HOSE
Must be in accordance with
the relevant standards.
MULTIMETER
(for electrical checks)
You will also need the
following tools:
1. Electric drill
2. Masonry drill bit
(only required if fitting the cooker
on a stone or concrete floor)
3. Rawlplugs
(only required if fitting the cooker
on a stone or concrete floor)
4. Steel tape measure
5. Cross head screwdriver
6. Flat head screwdriver
7. 4mm & 3mm Allen keys
8. Spirit level
9. Pencil
10. Adjustable spanner
11. Screws for fitting
stability bracket
Checking the parts
4 pan supports
Griddle plate
Grill pan and trivet
Levelling tool
Handyrack
Meat tin
4 Main oven shelves
Splashback & Plinth
Conversion kit from Natural gas to
LP gas